JEWELZIT SIZE GUIDE

Jewellery Size Guide

Find the right fit for rings, bangles and necklaces. Use the measurement guides and charts below as a reference before placing your order.

Inside diameter

Use a ring that already fits

  1. Choose a ring that fits the exact finger you plan to wear the new ring on.
  2. Measure straight across the inside of the ring, from inner edge to inner edge.
  3. Record the diameter in millimetres and compare it with the table below.

Measure the inside only — do not include the metal thickness.

Measure your finger

  1. Wrap a thin strip of paper or non-stretchy thread around the base of your finger.
  2. Mark the point where the ends meet. Keep it snug, not tight.
  3. Lay it flat against a ruler and measure the length in millimetres. This is your finger circumference.

Repeat the measurement two or three times for a more reliable result.

QUICK SIZE CHECK

Enter your measurement

Choose diameter or circumference and we’ll show the closest standard US ring size.

Enter a measurement to see the closest size.

CONVERSION CHART

Ring Size Chart

Use the physical measurement as your main reference. International conversions can vary slightly by manufacturer.

US India UK EU Diameter (mm) Circumference (mm)
47H½4714.946.8
4.58I½4815.348.0
59J½4915.749.3
5.510K½5016.150.6
612L½5216.551.9
6.513M½5316.953.1
714N½5417.354.4
7.515O½5517.755.7
816P½5718.157.0
8.517Q½5818.558.3
918R½5918.959.5
9.519S½6119.460.8
1020T½6219.862.1
10.522U½6320.263.4
1123V½6520.664.6
11.524W½6621.065.9
1225X½6721.467.2
12.527Z6821.868.5
1328Z½7022.269.7

BANGLE GUIDE

Bangle Size Chart

Measure the inside diameter of a bangle that already fits, or measure across the widest part of your hand. Bangle sizing refers to the inner diameter, not wrist circumference.

01

Use a bangle that fits

Lay it flat and measure straight across the inside from inner edge to inner edge.

02

Measure your hand

Bring your thumb and little finger together, then measure around the widest part of the hand where the bangle must pass.

Indian Bangle Size Inner Diameter (in) Inner Diameter (mm) Approx. Inner Circumference (mm)
2-22.12554.0169.6
2-42.25057.2179.6
2-62.37560.3189.4
2-82.50063.5199.5
2-102.62566.7209.5
2-122.75069.9219.6

Tip: if your measurement falls between two bangle sizes, choose the larger size for easier movement over the hand.

NECKLACE GUIDE

Necklace Length Chart

Necklace placement varies with neck size, body shape, pendant size and chain style. Use these lengths as a practical visual reference.

14 in35.6 cm

Very close to the neck / collar position.

16 in40.6 cm

Close to the base of the neck.

18 in45.7 cm

Typically sits around the collarbone.

20 in50.8 cm

Usually falls just below the collarbone.

22 in55.9 cm

Upper-chest placement on many wearers.

24 in61.0 cm

Typically reaches the mid-chest area.

30 in76.2 cm

Long chain, commonly worn over clothing.

36 in91.4 cm

Extra-long styling length.

How to choose your necklace length

Wrap a soft measuring tape around your neck where you want the chain to sit, then add extra length depending on the look you prefer. For pendants, also allow for the pendant drop.

Measure later in the day

Fingers can swell slightly as the day goes on, so evening measurements often give a more comfortable fit.

Avoid cold hands

Cold fingers can measure smaller than usual. Let your hands return to a normal temperature first.

Check your knuckle

Your ring needs to pass over the knuckle comfortably while still sitting securely at the base of the finger.

Wide bands feel tighter

For wider or heavier bands, the next half size up can sometimes feel more comfortable.